CIPAC MT 185.1

CIPAC MT 185.1, Collaborative International Pesticides Analytical Council (CIPAC) – es handelt sich um eine Version der vom CIPAC veröffentlichten Methode des Nasssiebverfahrens (wet sieve test). Das Verfahren beschreibt, wie Formulierungen, die bei Verdünnung mit Wasser eine Suspension bilden (z. B. benetzbares Pulver – WP, wasserdispergierbares Granulat – WG, Suspensionskonzentrat – SC) bestimmt, der nach der Dispergierung in Wasser auf einem Sieb mit einer gemäß definierten Maschenweite zurückbleibt. CIPAC ist eine internationale Organisation, die analytische Methoden und physikalisch-chemische Prüfverfahren für Pflanzenschutzmittel standardisiert; CIPAC-Methoden sind in Zulassungsunterlagen für Pflanzenschutzmittel, Produktspezifikationen und Qualitätskontrollprozessen weithin anerkannt.

Note on regulatory status: The CIPAC MT 185 series defines the general wet sieving test for suspension-forming formulations; MT 185.1 is a revised version of this series. There are also historically developed variants of the wet sieving method specific to certain formulation types (e.g. separate methods for wettable powders). The version to be used and the sieve mesh size must be determined in accordance with the product type, the product specification and the relevant regulatory framework. It is therefore crucial to check the sieve mesh size defined in the product specification and the version number of the method before commencing the test.

The basic principle of the test is as follows:

  • The formulation is dispersed in water of standard hardness at the concentration specified in the product specification.
  • The resulting suspension is passed through a sieve with a specified mesh size (usually 75 µm for suspension-forming formulations).
  • The residue remaining on the sieve is thoroughly washed and dried.
  • The dried residue is weighed and the percentage of material remaining on the sieve (% residue on sieve) is calculated.
  • The result is compared with the limit specified in the product specification (e.g. maximum residue level in %).

The key parameters reported in the study are as follows:

  • Bridge clearance (%)
  • Mesh size (µm) and screen type/material
  • Sample volume and dilution concentration
  • Water hardness and temperature (°C)
  • Washing process (wash load, pressure, duration)
  • Drying conditions (temperature, duration) and weighing conditions
  • Appearance of the residue (clumping, granular residue, foreign matter, etc.)
  • Comparison with the specification value (if available)
  • Data on measurement uncertainty and repeatability

Why is this being done?

CIPAC MT 185.1 is carried out for the following scientific, technical and regulatory purposes:

  • Assessment of dispersion quality: determining whether the formulation disperses sufficiently finely in water and whether any residues in the form of large particles or lumps remain
  • Ensuring safe use: Providing essential information to reduce the risk of blockages in the spraying equipment (nozzle, filter, pipe)
  • Verification of compliance with the product specification: determining whether the residue remaining on the sieve complies with the specified values
  • Quality control: Monitoring consistency between production batches and ensuring product quality
  • Formulation and process development: optimisation of comminution and granulation, as well as the selection of dispersants and binders; improvement of particle size distribution
  • Assessment of storage stability: Monitoring of dispersion behaviour following ageing and the retention of the sieve residue
  • Support with the preparation of registration dossiers: use in pesticide registration dossiers (e.g. EU Regulation 1107/2009, national regulations) and product specifications
  • Evidence-based approach: Contribution to the holistic assessment of the product in conjunction with other formulation tests (wetting time, suspension capacity, suspension stability, foaming, pH), analytical data and stability studies

CIPAC MT 185.1 does not, in itself, provide comprehensive information on product quality or biological efficacy. It enables a physico-chemical performance assessment; the results should be interpreted in conjunction with other formulation tests, analytical data, stability studies and the requirements of the specifications.

As part of our nano-testing services, we carry out wet sieve tests in accordance with CIPAC MT 185.1 within our accredited laboratory facilities and under our quality management system, applying scientific rigour. Our scope of services includes the following:

Method selection and validation

  • Depending on the product type, product specification and regulatory requirements, validation of the applicable method version and the sieve mesh size (e.g. 75 µm)
  • Standardisation of test conditions (water hardness, temperature, dilution ratio, washing method, drying conditions)
  • Validation of the method and verification using reference products
  • Evaluation and reporting of measurement uncertainty
  • Documentation of method-specific limitations and conditions of use

For your wet sieve tests in accordance with CIPAC MT 185.1 You can contact Nano-Test for information on selecting the method version and sieve mesh size, establishing standard conditions, sample acceptance criteria, specification comparison, the test plan and reporting procedures.