EN 14338
The full title of the standard EN 14338 is "Paper and board intended for contact with foodstuffs – Conditions for the determination of migration from paper and board using modified polyphenylene oxide (MPPO) as a simulant".
EN 14338 defines the test conditions for the determination of migration from paper and board materials coming into contact with foodstuffs, using MPPO (modified polyphenylene oxide; commonly known as Tenax) as a simulant for dry foodstuffs.
The standard provides a framework for sample preparation, contact conditions with MPPO, extraction of the MPPO after contact, and evaluation of the obtained extract using suitable analytical methods.
The main difference between EN 14338 and the EN 1186 series is that the EN 1186 series focuses on the gravimetric determination of overall migration from plastic materials, whereas EN 14338 defines the conditions for the analytical measurement of substances passing from the paper/board matrix into MPPO.
MPPO simulant and scientific basis
MPPO is a solid simulant used in particular to simulate contact with dry foodstuffs. Thanks to its large surface area and adsorption capacity, it enables the retention of volatile and semi-volatile organic compounds that may escape from the paper/board matrix.
The scientific procedure of the test is generally based on the following principle:
- The paper/board sample is brought into contact with MPPO under the temperature and time conditions specified in the standard and the conditions of use of the product.
- After contact, the MPPO is extracted with a suitable solvent to recover the migrated substances.
- The extract is analyzed using GC-MS, LC-MS/MS, HPLC-DAD, or equivalent analytical methods depending on the target components.
- Correction is carried out using an MPPO blank sample (blank) and, where applicable, by recovery tests.
- The results are reported with reference to the contact area or the sample mass.
Critical parameters in this regard are: the surface area of the sample, the mass of the MPPO, the contact temperature and duration, the extraction solvent, the extraction duration, the sensitivity of the analytical instrument, and the measurement uncertainty. The test conditions according to EN 14338 are selected taking into account the actual conditions of use of the product and the requirements of the relevant legislation.
What is the purpose of testing according to EN 14338?
This test serves the scientifically sound
assessment of the safety and suitability of food contact materials made of paper and board. The main reasons:
- Food safety: Determination of the migration potential of constituents that can pass from paper/board packaging into dry foodstuffs.
- Legal and technical suitability: Provision of technical data within the scope of relevant national legislation, BfR recommendations, Council of Europe resolutions, and customer specifications.
- Risk assessment: Evaluation of the migration potential of printing ink constituents, coatings, adhesives, additives, mineral oils, and process-related residues.
- Product development: Investigation of the migration behavior of new paper/board formulations, barrier coatings, and structures with recycled fibers.
- Quality control: Monitoring consistency between production batches and evaluating the impact of process changes.
- Supply chain and export: Generation of test data for declarations of conformity, technical documentation, and customer audits.
In our laboratory, we carry out the processes of test planning, migration testing, extraction, analytical measurement, calculation, and reporting in this context in accordance with the standard, the requirements of the quality management system, and the applicable legal regulations. For your paper/board product's migration testing needs within the scope of EN 14338, please feel free to contact our technical team.

